What Is a Track Saw Used For? An Overview of 5 Different Uses

No matter you are working on a DIY project in your house or renovating any place, you need to have a saw. Sawing is a necessary process in these cases. A power saw is of great help. You don’t have to put in the labour. All you need to arrange for is a source of power. Whether you are cutting logs of wood or cutting the deck, a power saw is of great help. Now, you can get a variety of power saws in today’s market. Table saw, miter saw band saws, chop saws, cabinet saws, scroll saws, and whatnot. However, every type has a different application. Of all the saws, the track saw is most convenient to be used and versatile too.

A track saw and a circular saw might look similar but they have different features. Both are used to cut angles and straight lines and have a circular blade. Both can be used t cut through a variety of surfaces. However, they have varying applications. If you are unsure about which of the two you need to buy, continue reading the article below.

What is a Track Saw?

A track saw is a handheld saw which falls under the category of circular saws. It is a type of power saws, that require a power source for its functioning. It has a rectangular long rail, which is the track. It slides on the track for functioning.

This allows users to make accurate, long cuts just as they need. There’s no rail guard, which might block your view. So you can see what and how are you cutting the materials. Also, the track saw has rubber strips at the bottom, which secures the materials in place, helping you to cut through easily. They are becoming a popular choice among professionals, especially because of their lightweight nature. They are easy to be handled and very precise when used. However, they lack the clamp which might be a problem initially. For that, you can buy clamps from the market to hold things in place. The rubber strips it has provide a really good grip.

The track saw has a shroud, where it collects dust as much as possible. This helps you keep the workplace clean. Also, this feature has made it easier to dump the dust afterward. You don’t have to put in extra labour trying to collect the dust all around. Its set up is simple too. It might take some time for setting it up, but once you are done following the simple steps, it would finish your work in minutes. For setting the machine, you need to mark the materials, mark the depth of the cut required, set the track down, and attach the dust bag.

The saw is small in size, but large-sized ones are also available. Hence, they don’t consume much space and can be stacked upright. If the size of the track isn’t sufficient for your project, you can buy larger sized ones and fix them. The best part about track saws is their accuracy. They result in extremely clean and clear cuts. However, the price is higher as compared to circular ones. That’s one of its disadvantages.

An overview of 5 different uses of a track saw

Often people get confused about whether to buy a track saw. To help them decide that, knowing the various usages of s track saw is essential. They must know how buying and using a track saw would benefit them. Below given are 5 points explaining where can one use a track saw:

  • Cutting straight, long miters

One of the major reasons why people prefer track saws is because of the desired straight cut that it can provide users with. Users don’t require clamping down anything. Track saws enable users to move through their projects at a much faster pace. When you use a circular saw to cut several logs of wood, again and again, you have to ensure every time that your guide is lined up exactly as it should be. You don’t have to do this while using a track saw. Using a track saw is much easier. The only restriction might be the size of the track, but nowadays there are ling tracks available in the market. You can opt to buy them if the length becomes an issue.

  • Cutting Drywall Boards       

Drywall is difficult to cut. There’s no way you can prevent the place from becoming dusty and messy while cutting through drywall. It’s no doubt a hectic work. If you are up to cutting drywall boards inside, you have to conduct an extensive cleaning process. In this case, a track saw is the best machine to be used because it comes with a dust cleaning feature, which not only reduces your extra labour but also saves your energy and time. The track saw would help you collect at least half the dust during this process. Depending on the size of the track saw and its ability, you cut up to two or three pieces of drywall at one go.

  • Cutting Plywood on a Job Site

The track saw is extremely lightweight. You don’t require much labour to carry it from one place to another. Carrying a track saw is much easier than carrying plywood around. If your track saw is as long as plywood, you can cut through it in a short period. This allows your project to move at a quick pace, enabling you to wrap it up as soon as possible. You don’t have to clamp the pieces of wood or shift them to a table saw and cut them there. If you are looking for a Machine best suited for any job site, it’s a track saw, because it’s easy to be used and versatile.

  • Cutting Studs

It’s a known fact that track saws cost more than circular saws because they are equipped with better features and provide better utility. One of the best things about track saws is that they can even function like circular saws. While cutting studs, you are not likely to need to track saw so you can just use it as you would use a circular saw. Because of this feature, you can use two different saws paying the price of just one. Users can’t experience this versatility when using a circular or a table saw.

  • Laying Wood Flooring

Wood floors that have been installed properly don’t look good. Your floor appears crooked and it’s not a pretty sight to catch. The track saw can be used in this case. The track length must be perfect enough to make sure your wood floor gets properly installed. Users can easily place the track down on the wood pieces can cut them in the proper size to make sure that all joints are properly shaped and labelled. As we have already said, the track saw is lightweight, hence you can carry it around as you work on the entire floor.

How a track saw is different from a circular saw?

A track saw is a kind of circular saw having certain similarities and differences as well. In many cases, the track saw is a better option than a circular one. Let’s see how.

  • The chief advantage of a track saw when compared to a circular saw is that it enables users to cut through accurately along a straight line.
  • Also, it’s comparatively easier to be used. With the help of a track saw, users can set up a straight edge to allow better and more accurate cutting.
  • When you use the track saw, you get rid of any errors that might have occurred due to sideways movement.
  • The track saw is advantageous over the circular saws because it has a dust collection mechanism, that collects dust during the process of cutting, this reducing anyone’s time, effort, and energy.
  • Moreover, the track saw has a long track in front which a circular saw doesn’t have. The track saws allow users to make rip cuts, crosscuts, and angle cuts whereas circular saws only can make rip cuts and crosscuts.

The only disadvantage is that the track saw being large is less portable. But can be carried from one place to another.

A track saw undoubtedly provides more benefits and advantages than a circular one. We have already provided a comprehensive comparison between the two which clearly shows how the former is a better choice than the latter. If you are in a doubt, take a look at the comparison and your confusion would be solved. In short, if you are wanting extremely precise, accurate cuts, buying a track saw is the best option. They are most preferred by professionals because they result in clean, prominent, and sharp cuts with no rough edges. However, if you can’t afford to buy a track saw, you can go for a circular one. Also, remember while choosing a track saw, check the following things: torque, bevel capacity, RPM, soft start, size of the material, or. Surface it can cut through, does it need oil, portability, and versatility.

Leave a Comment